Mustang Monthly Homepage

Mustang Bullitt(TM) Races To The Streets In 2008

Buckle Up And Brace For Action, McQueen Fans

all contributors: Courtesy of Ford
 2008 Ford Mustang Bullitt
 2008 Ford Mustang Bullitt
 2008 Ford Mustang Bullitt
 2008 Ford Mustang Bullitt
 2008 Ford Mustang Bullitt
 2008 Ford Mustang Bullitt
 2008 Ford Mustang Bullitt
 2008 Ford Mustang Bullitt

Four decades after hitting the big screen and redefining the on-screen car chase, the Ford Mustang Bullitt returns to the streets in 2008, blending the best Mustang ever with the latest Ford Racing technology.

This modern classic delivers a balance of power and performance, thanks to special chassis and suspension tweaks as well as the 315 horsepower and 325 pound-feet of torque that Bullitt delivers through its 4.6-liter V-8 engine.

"The 2008 Mustang Bullitt embodies the true spirit of the 1968 movie car," said Derrick Kuzak, group vice president, Global Product Development. "Like the original Bullitt, this car dials the driving dynamics up a notch for Mustang enthusiasts who love the performance, handling and the sweet sound of Ford power that only Mustang can deliver."

The 2008 Bullitt arrives in dealers early next year, with a starting MSRP of $31,075 (including destination and delivery) and limited production of 7,700 units for the U.S. and Canada.

The launch of the limited edition 2008 Mustang Bullitt coincides with the 40th anniversary of the release of the Warner pos. Pictures film that gave the original car its name. In the movie, legendary actor Steve McQueen drove a Dark Highland Green 1968 Mustang GT that gained cult status among Mustang enthusiasts, thanks to a seven-minute scene that film and car buffs believe defined the modern movie car chase.

Bullitt Chassis Delivers a Balance of Performance and Comfort
Ford engineers modified the 2008 Mustang Bullitt's chassis and suspension to fine-tune handling and ensure the extra horsepower and torque from the 4.6-liter V-8 is put to good use. The live rear axle uses a unique 3.73:1 gear that helps launch the Bullitt with vigor.

Stock Mustang GT shocks and struts were swapped out for new units that allowed engineers to dial in a more aggressive driving dynamic while still maintaining the outstanding ride and balance of the base Mustang GT. A tower-to-tower pace designed specifically for the Bullitt lends additional torsional and lateral stiffness to the chassis for improved cornering and holds a unique serial number for each Bullitt.

"The 2008 Mustang Bullitt delivers balanced performance," said Paul Randle, chief engineer. "Comfort is not compromised for performance. Performance is on demand. You can easily take Bullitt from the track to the street and back onto the track with confidence."

The pakes also have been improved versus the base Mustang GT's. More aggressive front pads were developed specifically for Bullitt and improve fade resistance and pedal feel.

The 2008 Mustang Bullitt wears unique cast-aluminum Euroflange wheels, offering a modern twist on the original movie car. The Dark Argent Gray spokes feature a satin finish, while a pight-machined lip completes the look. Calipers are colored to match the wheel. The wheels are wrapped in the same P235/50ZR 18 BF Goodrich g-Force T/A KDWS tires used on Mustangs at the Ford Racing High Performance Driving School at Miller Motorsports Park in Utah.

Powered by Ford Racing
Bullitt packs firepower under the hood. The 4.6-liter, 3-valve V-8 delivers 315 horsepower at 6,000 rpm and 325 pound-feet of torque at 4,250 rpm.

Engine calipation is designed to increase throttle response for a snappier acceleration feel. The redline has been boosted by 250 rpm to 6,500, with top-end speed bumped to 151 miles-per-hour. Gears are selected via a Tremac 5-speed manual transmission, and the shifter is topped with a polished aluminum shift ball designed specifically for the 2008 Bullitt.

The car features the first use of an open-element air filter in a factory-produced, fuel-injected Mustang. Inspired by Ford Racing, the intake is tucked neatly behind the driver side headlamp, mounted in an air box that was tooled up specifically for the Mustang. The hood liner was extensively modified to provide a full seal to the air box, ensuring that the engine is fed a steady diet of cooler air.

"Colder air reduces intake losses," said Randle. "The new cold-air intake has shown a reduction in rise over ambient temperature from 50 degrees down to 17 degrees Fahrenheit. That equates to more horsepower and more torque in all driving conditions."

Engine performance is further enhanced through the use of an innovative adaptive spark ignition system, new for the 2008 Mustang.

The system can sense, within a few seconds, what type of fuel is being injected into the motor and adjusts the spark to provide maximum torque at any given speed - and as much as 10 pounds-feet more between 1,000 and 4,000 rpm.

Bullitt can run on either premium or regular fuel. Ford recommends premium fuel for optimum performance, but the adaptive spark ignition will adjust the spark to burn regular fuel without damaging the engine.

"With all the improvements we've made to the engine and the taller 3.73-to-1 rear gear, the Bullitt will plant you firmly in the driver's seat when you stand on the throttle. We've seen zero to 60 times drop by up to three tenths of a second," said Randle. "There's also plenty of power on tap at any speed. The car definitely feels lighter on its feet, and it is."


1  | 2  | Next
FREE, no-hassle price quotes on the new Mustang you’ve been looking for.
 
1965 Mustang GT Fastback - Hidden Pleasures
"I like the thought of opening the hood after dusting someone and saying, 'It's just a little 289.'" --Dominic Greco... more
 
2008 Shelby GT500KR - The Real Deal
With 540 HP, The New '08 1/2 Shelby GT500KR Is A Genuine King Of The Road-Just Like The Original '68 1/2... more
 
1970 Cobra Jet Mach 1 - Grab You Blue
Neil Bell's '70 Cobra Jet Mach 1 Is Decidedly Different With Its Grabber Blue Paint And Q-Code Powerplant... more
 
1966 Mustang Convertible - Island Girl
Nancy Johnson's '66 Convertible Was Built For Show And Go On Lopez Island... more
 
1967 Shelby Mustang GT350 Convertible - Renegade
At Florida State University, Renegade Is The Name Of The Mascot's Horse, So FSU Fan Jeff Billings Feels It's Also A Fitting Name For His '67 Shelby Tribute Convertible... more
 
1966 Ford Mustang Hardtop - The Judge's GT
Many Would Say That A C-Code '66 Hardtop Can't Be A GT. MCA Judge Wally Short Begs To Disagree.... more
 
Mustang Monthly July 2008 Contents
In an exclusive Mustang Monthly interview, Carroll Shelby clears the air about trademarks, licensing, lawsuits, and the controversy with SAAC.... more
 
How To Step Up To A Currie 9-Plus Rearend
Project Reclaim Gets A New 9-Inch Rear Axle From Currie Enterprises... more
 
How To Fabricate And Install Tubing
With Tubing From Classic Tube And Advice From The Restomod Shop, You Can Do It Yourself... more
 
'88 Saleen Mustang - Pursuit Coupe
Fox-Body Saleen Coupes Are Rare Indeed. Scott Robinson's Police-Package Saleen Is Rarer Still.... more

Mustang Monthly Blogs

 
Mustang Racer Named Head of Ford Racing
Ford executive Brian Wolfe, one of the pioneers of Mustang 5.0 drag racing, has been appointed as... more
 
New 5.0 Mustang 1.0 Budget Package From Fidanza
Complete clutch and flywheel combo for under $350... more
 
Solving Clutch Woes
Clutch improvements you cannot see, but can feel when it's time to twist the key.... more
 
The Cleveland/Oldsmobile Connection
Maybe there's an explanation for two types of 351ci V8 engines in 1970-80.... more

Mustang Monthly Forums

 
1968 mustang 4 speed transmission
The correct number for your 68 302 in a four speed is C6ZZ-7003E with ID tag RUG-E2 (Ford... more
 
73 Tach not working
And if all else fails and the tach is bad, the August 2008 mustang monthly magazine has a great... more
 
Hey Mustang Fans!
The Ford Motor Company is looking for film scripts about the iconic Mustang automobile. They have... more
 
HELP!! Part Number Lookup
Fellow Mustang owners,... more