Mustang MonthlyHow To Interior Electrical
How To Install an Electric Fan
Old Air Products Frees Up Horsepower And Improves Efficiency With By-Wire Cooling
Fit And Function
Electric fan performance depends on proper fit and operation. The Old Air fan should be close to the radiator but at least 1 inch from the tubes. If you get too close, air stagnation issues can cause hot spots. Positioning the fan at least 1 inch from the radiator core promotes good air flow and better cooling. To achieve the proper distance, shim the fan at its attachment points. Maintain enough clearance between the water pump pulley and fan to ensure there's no chance of interference.
When searching for a power source for your Old Air electric fan, never get it from the positive terminal at your ignition coil. Because the ignition coil gets its power from resistor wire, it gets approximately 9 volts from the battery instead of 12 volts. If you connect your fan there, your Mustang might stall when the fan comes on. Get your power from the "I" terminal on the starter solenoid. If that doesn't work for your application, source the power from one of the power terminals underdash that's live only when the ignition is on. Always protect your Mustang with a fuse or circuit breaker between the power source and fan.