Mustang Monthly Homepage Mustang Monthly

How To Fabricate Bend Hard Lines

This is an easy step to overlook. Don't forget to slide the fitting on before flaring. Otherwise, you wind up with a flare and no fitting. This is a 1/8-inch double-wall brake line, which requires a double-flare.
How To Fabricate And Install Tubing

 This is an easy step to overlook. Don't forget to slide the fitting on before flaring. Otherwise, you wind up with a flare and no fitting. This is a 1/8-inch double-wall brake line, which requires a double-flare.  View Related Article

 

Get Adobe Flash player

Car Research Guide