|
|
 This is the Summit SUM-720224...  This is the Summit SUM-720224 rear sway bar kit for S197 Mustangs. Everything's here to get the job done, which can be accomplished in about one hour. What makes this bar better than stock is its larger diameter, adjustable design, and the use of urethane bushings. Although Summit has provided Grade 8 hardware, you do have the option of using your Mustang's factory hardware.  The factory rear sway bar...  The factory rear sway bar attaches at the rear axle with a rubber bushing. With quiet and smoothness comes lackluster handling. We're going to change all that with stiffer urethane bushings and a bigger bar to reduce body roll.  Next, Marlon removes the rear...  Next, Marlon removes the rear sway bar here, which frees up the entire assembly.  The Summit SUM-720224 kit...  The Summit SUM-720224 kit includes urethane bushings, which are tapped into end links as shown using the lubricant provided.  Steel sleeves are pressed...  Steel sleeves are pressed into the urethane link bushings as shown. These provide hardware support and prevent collapse. Make sure you don't get them mixed up because both are of similar length.  Sway bar brackets and bushings...  Sway bar brackets and bushings are pressed together, one set for each side. Sleeves are pressed in once bushings are secure.  End links are installed like...  End links are installed like this. Factory hardware will not fit the Summit end links, which means you must use the Summit hardware.
|