Imagine a modern--yet cool--sound system that fits right into your classic Mustang dashboard without cutting the instrument panel or other modifications. The new RetroSound offers modern sound for vintage Mustangs with a liquid crystal display (LCD) that's easy to read, dual die-cast knobs in chrome, front and rear auxiliary inputs (for connecting iPod, satellite, and other portable devices), underdash USB/SD card reader for digital playback, and 50 watts in four corners. There's also a remote control.
RetroSound is a compact system you can install in a matter of hours and be ready for cruising by evening. Not only will this system fit '65-'73 Mustangs, there are also RetroSound packages designed for '74-'86 Mustangs.
1 RetroSound’s contemporary...
1 RetroSound’s contemporary sound system is engineered for all kinds of classic cars including,’65-’86 Mustangs, thanks to adjustable brackets and shaft controls. This brings modern technology right into your Mustang’s inner world with LCD display, front and rear auxiliary inputs, USB/SD card reader, and a remote control. Your Mustang’s original AM radio die-cast knobs will fit this unit, which makes it nearly invisible at first glance. Later model ’74-’86 knobs will also fit.
2 RetroSound USA provided...
2 RetroSound USA provided us with a complete speaker package, which fills the interior with rich surround sound technology with 6 x 9s in back, 6-1/2-inch round speakers in the kick panels, and a twin-coil speaker in front.
3 Installation begins with...
3 Installation begins with the adjustable brackets that are designed to fit any ’65-’86 Mustang. You’re going to love the quality, not to mention the compact nature of these RetroSound units.
4 Begin the in-dash installation...
4 Begin the in-dash installation with a fit check, which involves getting the brackets and controls adjusted to your dashboard. Use a long #3 Phillips screwdriver to get the shaft centered in each hole.
5 The controls are adjusted...
5 The controls are adjusted for proper in-dash positioning, then locked into place.
6 Once you have the unit...
6 Once you have the unit in place, shaft depth adjustment is next via fine thread nuts behind the dash. Always use a supplied flat washer between the nut and dashboard to protect your paint. Do not overtighten.
7 The RetroSound unit blends...
7 The RetroSound unit blends into the early Mustang’s steel dashboard thanks to real die-cast Mustang radio knobs.
8 RetroSound wires in with...
8 RetroSound wires in with four RCA auxiliary jacks for the front and rear speakers, power connections, multiplex plug for accessories, and external antenna. Each wire is labeled, so installation is a snap. But if you get hung up along the way the instructions are easy to follow. And remember, any sound system is only as good as its ground connection.
9 MP Products and Mustangs...
9 MP Products and Mustangs Plus provided these good-looking kick panels for Project Reclaim, which debuted last month in Mustang Monthly. Use the RetroSound 6-1/2-inch speakers as a template for screw holes and start there.
10 A compass is used to scribe...
10 A compass is used to scribe the kick panel to achieve a perfect circle.
11 The scribed circle is...
11 The scribed circle is measured to make sure it is, in fact, perfect, then cut to size.
12 RetroSound’s 6-1/2-inch...
12 RetroSound’s 6-1/2-inch speaker is installed using tinnerman’s nut plates and provided Phillips sheetmetal screws.
13 This rear access panel...
13 This rear access panel from MP Products and Mustangs Plus is perfect for Reclaim’s rear cargo area. As with kick panels, use one of the RetroSound 6x9 speakers or the provided template to scribe a pattern.
14 Richard Bramlett from...
14 Richard Bramlett from The Restomod Shop uses a fine-tooth air saw to buzz through soft plastic for a clean installation.
15 The RetroSound 6x9-inch...
15 The RetroSound 6x9-inch speakers are seated and secured using tinnerman’s nut plates and Phillips screws. Do not overtighten.
16 The speaker grilles pop...
16 The speaker grilles pop into place without tools. Be careful not to exert too much pressure.MM