Related Photo Galleries
19. Fitting the quarter window regulator with the switch bolted on is a real patience tester because there’s so little room. With a little gentle prying, we got the regulator into place and the switch in the opening, but in retrospect it might have been better to install the power crank switch with tapping screws (or weld nuts onto the regulator mounting bracket) so that the switch could be installed after the regulator is mounted. Notice we simply grounded the two ground wires with a ring terminal near the motor and joined the two power wires together for a single run to the front of the car. Now you get to repeat the fun for the other quarter window.