Mustang MonthlyProject Vehicles
1966 Ford Mustang - Project '66 - Ford 289 Short-Block Buildup Part 2
We Finish Off our Small-Block Buildup With Heads, Intake, and a Dyno Test.
Step By StepView Photo Gallery
Getting the 289 together for our project car has given us a much needed boost of enthusiasm. While you're reading this second part of the engine buildup in early 2004, due to editorial lead times we're tapping away at the keyboard in November. We've completed the drivetrain installation, and the car is almost complete. Barring any major setbacks, our project should be running by the end of 2003 and any bugs worked out in plenty of time for a debut at the big 40th Anniversary bash in Nashville.
In last month's first half of the buildup, we discussed building a strong foundation, and showed you the parts and assembly of the "short-block" package. After a few weeks of scheduling difficulties, we were able to get back to John Douglas' place and complete our buildup into a "long-block" that would be ready for the A&S Motorsports dyno. Our long-block buildup utilizes the CNC-modified cylinder-head castings from Power Heads, valvetrain components from Competition Cams, and an Extrude Honed factory 4V intake. Arriving just in time for our dyno session, we also used a show-ready Autolite 4100 from Pony Carburetors, modified to complement our engine specs, and an Autolite distributor restored by Mike Ulrey, which was fitted with a PerTronix Ignitor (from National Parts Depot) and a custom advance curve.
Take a look at our small-block beauty and tune in for our next Project '66 article in which we'll detail our 289 to make the Mustang Club of America nod in approval.