Mustang Monthly Homepage

1966 Ford Mustang Hardtop - Project '66 Audio Upgrades

Our Hardtop Project Receives Cruising Tunes Capability Via Custom Auto Sound

writer: Mark Houlahan
photographer: Mark Houlahan

Our USA6 arrived along with the Custom Autosound CD changer and a full complement of speakers to convert our hardtop into a rolling sound stage. Except for a few solderless terminals and some speaker wire, we were ready to crank up the tunes. Inset: The Custom Autosound 6x9 speaker grilles look the vintage part and stay low-key--just as we wanted.
Our USA6 arrived along with the Custom Autosound CD changer and a full complement of speakers to convert our hardtop into a rolling sound stage. Except for a few solderless terminals and some speaker wire, we were ready to crank up the tunes. Inset: The Custom Autosound 6x9 speaker grilles look the vintage part and stay low-key--just as we wanted.

After recently assembling Project '66's dash, we were left with a nice hole in the center of it where the stock AM radio formerly resided. We wanted the stock look, but couldn't bear the thought of listening to AM stations. I mean, I'm only 32! That's way too young to start listening to AM talk radio. So we needed some quality audio relief for cruising, car shows, and those occasional trips to work.

Our first thought was Custom Autosound Manufacturing, the unchallenged leader in vintage car audio. Throughout the years, we've worked with Carl Sprague and his band of audio experts to outfit several project cars, and we wanted to have the Custom Autosound quality in our Project '66 as well. Throughout the years, we've ordered many products from Custom Autosound's catalog. In fact, the popular USA1 and USA5 models have graced several of our projects, but we wanted to try something new.

1 We know it looks like spaghetti right now, but these few wires aren't really that intimidating. Before mounting your stereo (which makes it harder to wire and circuit-test everything), prewire the stereo on the floor. Here we've begun to route our speaker wires and we've connected our antenna, which was previously installed.
1 We know it looks like spaghetti right now, but these few wires aren't really that intimidating. Before mounting your stereo (which makes it harder to wire and circuit-test everything), prewire the stereo on the floor. Here we've begun to route our speaker wires and we've connected our antenna, which was previously installed.

Our basic premise for the audio solution for our hardtop was a near-stock audio system look, but we wanted modern audio-sound quality, options, and power output. Our selection of the stereo, or head unit, was based on what we wanted to listen to. Since our cassette collection went the way of 45s, we wanted to listen to only CDs and FM broadcast signals. Though the new Secret Audio from Custom Autosound is a great idea, we wanted to completely conceal the full, modern audio from normal view (great for Concours cars), so we opted for the new USA6. This stereo has the great look of a vintage AM radio bezel and tuner and has a digital tuner face mounted behind it. At first glance (with the radio off), it looks just like an old AM radio! Besides modern features, such as separate base and treble controls, a fader, and more, the USA6 will control a Custom Autosound six-disc CD changer as well; problem solved.

2 You'll have to find several connections in your dash for the stereo. This photo shows the radio illumination circuit. Connect it to the three-way plug near the headlight switch.
2 You'll have to find several connections in your dash for the stereo. This photo shows the radio illumination circuit. Connect it to the three-way plug near the headlight switch.

However, the speaker placement had us scratching our heads. Though Custom Autosound's kick-panel speakers are great, we wanted to maintain our stock-looking Deluxe interior kick panels with their carpet and stainless trims. Installing a dual-voice coil 4x10 speaker in the dash was our first thought for the front half of our speaker selection. We ultimately decided upon adding the optional eight-track stereo speakers and grilles to our door shells. We'd already cut holes for Deluxe interior courtesy lights, so what's another hole for speakers. At this point, our front speaker locations and mounting would look totally stock, but high-quality Custom Autosound speakers would be hidden behind the grilles. Upon looking at the package tray, the '66 hardtop had room for only one centrally located 6x9-inch speaker. We thought about a Custom Autosound dual-voice coil speaker for this location, but Custom Autosound's Mike Daughtery advised against this because we wouldn't have a clear stereo separation. If we could live with the nonstock look, Mike suggested a pair of Custom Autosound 6x9s with their vintage-looking grilles. We took Mike's advice and we're glad we did. The grilles have a certain vintage flair to them, they don't detract from the look of the car, and the audio system sounds impeccable! For a little more than $600, we have all the components to produce quality audio output in our Project '66 for years to come. Check out Custom Autosound's Web site or call to locate a dealer near you for more information on the USA6 and other Custom Autosound audio solutions.


3 Digitally tuned stereos require a memory circuit, or a voltage feed, at all times to retain station memory and other settings. You can attach this wire to the three-way plug on the right side of the dash-cluster opening. Alternately, you can connect it to your cigarette lighter feed if it's working.
3 Digitally tuned stereos require a memory circuit, or a voltage feed, at all times to retain station memory and other settings. You can attach this wire to the three-way plug on the right side of the dash-cluster opening. Alternately, you can connect it to your cigarette lighter feed if it's working.
4-A Don't make the same mistake we made and connect the CD-changer cable backwards. It can plug in both ways, but we started at the CD changer and worked our way forward, only to realize the plug wouldn't clear the heat sink on the back of the stereo. Install the CD-changer cable to the stereo first.
4-A Don't make the same mistake we made and connect the CD-changer cable backwards. It can plug in both ways, but we started at the CD changer and worked our way forward, only to realize the plug wouldn't clear the heat sink on the back of the stereo. Install the CD-changer cable to the stereo first.
4-B Don't make the same mistake we made and connect the CD-changer cable backwards. It can plug in both ways, but we started at the CD changer and worked our way forward, only to realize the plug wouldn't clear the heat sink on the back of the stereo. Install the CD-changer cable to the stereo first.
4-B Don't make the same mistake we made and connect the CD-changer cable backwards. It can plug in both ways, but we started at the CD changer and worked our way forward, only to realize the plug wouldn't clear the heat sink on the back of the stereo. Install the CD-changer cable to the stereo first.
5 The CD-changer cable can then be routed to the rear of the car. In our installation, we concealed all the cabling as much as possible so it wouldn't detract from the stock look. The CD-changer cable is thick and won't route cleanly through the doorsill (where the rear speaker wires were routed) thus we taped it in place along the rocker where it won't get stepped on or punctured with a screw.
5 The CD-changer cable can then be routed to the rear of the car. In our installation, we concealed all the cabling as much as possible so it wouldn't detract from the stock look. The CD-changer cable is thick and won't route cleanly through the doorsill (where the rear speaker wires were routed) thus we taped it in place along the rocker where it won't get stepped on or punctured with a screw.
6 The Custom Autosound CD changer has numerous mounting configurations available for it via these screw holes and the multimounting plates. We opted to mount ours under the rear deck, but you can mount it anywhere you feel comfortable accessing it (or hiding it as the case may be).
6 The Custom Autosound CD changer has numerous mounting configurations available for it via these screw holes and the multimounting plates. We opted to mount ours under the rear deck, but you can mount it anywhere you feel comfortable accessing it (or hiding it as the case may be).
7 Mounting the CD changer in this manner makes for a secure attachment with the least amount of possibility for damage from anything being placed in the trunk or sliding around in the trunk. The installation requires only four small screw holes, which allow for easy removal for a major show where you wouldn't want the CD changer to result in deducted points.
7 Mounting the CD changer in this manner makes for a secure attachment with the least amount of possibility for damage from anything being placed in the trunk or sliding around in the trunk. The installation requires only four small screw holes, which allow for easy removal for a major show where you wouldn't want the CD changer to result in deducted points.

1  | 2  | Next
FREE, no-hassle price quotes on the new Mustang you’ve been looking for.
 
1965 Mustang GT Fastback - Hidden Pleasures Photos
Web Exclusive! - We've got more photos that didn't fit in print.... more
 
1965 Mustang GT Fastback - Hidden Pleasures
"I like the thought of opening the hood after dusting someone and saying, 'It's just a little 289.'" --Dominic Greco... more
 
2008 Shelby GT500KR - The Real Deal
With 540 HP, The New '08 1/2 Shelby GT500KR Is A Genuine King Of The Road-Just Like The Original '68 1/2... more
 
1970 Cobra Jet Mach 1 - Grab You Blue
Neil Bell's '70 Cobra Jet Mach 1 Is Decidedly Different With Its Grabber Blue Paint And Q-Code Powerplant... more
 
1966 Mustang Convertible - Island Girl
Nancy Johnson's '66 Convertible Was Built For Show And Go On Lopez Island... more
 
1967 Shelby Mustang GT350 Convertible - Renegade
At Florida State University, Renegade Is The Name Of The Mascot's Horse, So FSU Fan Jeff Billings Feels It's Also A Fitting Name For His '67 Shelby Tribute Convertible... more
 
How To Install Four-Wheel Disc Brakes on a Fox 5.0
Stock or restomod? Vintage or Fox-body? Here are some ideas to build the Mustang of your dreams.... more
 
How to Install Louvered Side-Window Covers
Dominic Greco likes the thought of opening the hood after dusting someone and saying, "It's just a little 289."... more
 
1966 Ford Mustang Hardtop - The Judge's GT
Many Would Say That A C-Code '66 Hardtop Can't Be A GT. MCA Judge Wally Short Begs To Disagree.... more
 
Mustang Monthly July 2008 Contents
In an exclusive Mustang Monthly interview, Carroll Shelby clears the air about trademarks, licensing, lawsuits, and the controversy with SAAC.... more

Mustang Monthly Forums

 
HELP!! Part Number Lookup
Fellow Mustang owners, I am looking for a website or some resource where I can cross check part... more
 
67 mustang latches / locks
What's the trick to having perfect/smooth door latches? I'm finishing my 3+ year restoration and my... more
 
Tribute Cars LTD. Barrett-Jackson auction 08'...
I saw a S197 made to look like a 67' Fast back, the company that did it is called Tribute Cars LTD.... more
 
Can it be done for 40K or less?
I am new to this but have loved the 65-66' Fastback at 1st sight, w/ a big raise coming my way I'm... more

Mustang Monthly Blogs

 
Block Flaws
Block core shift and proper indexing means the difference between a good block and a bad one. ... more
 
Mustang Racer Named Head of Ford Racing
Ford executive Brian Wolfe, one of the pioneers of Mustang 5.0 drag racing, has been appointed as... more
 
Anyone Know What These Are?
These are period five-spoke wheels from the 1960s.  Do you know what they are? ... more
 
Checked Your Cooling System Lately?
Although summer is almost over, check your cooling system for fall fun.... more