Mustang Monthly Homepage Mustang Monthly

How To Install Rear Disc Brakes: From Drums to Discs



http://images.mustangmonthly.com/techarticles/173_0311_brake_2_s.jpg
2. The restudded axle shaft is installed as shown. This is a good timeto install new axle seals and bearings. Lubricate the axle seal withwheel-bearing grease or axle lube.
http://images.mustangmonthly.com/techarticles/173_0311_brake_3a_s.jpg
3. (above and right) Next, install the two halves of the brake mounting bracket. Make sureyou fit them in the correct spot over the axle bearing.
http://images.mustangmonthly.com/techarticles/173_0311_brake_3b_s.jpg
http://images.mustangmonthly.com/techarticles/173_0311_brake_4_s.jpg
4. Mount the dust shield next, anchoring it to the brake mountingbracket. Both dust shields should be pointed toward the front of thevehicle.
http://images.mustangmonthly.com/techarticles/173_0311_brake_5a_s.jpg
5. (above and right) Both brake caliper mounting brackets are positioned where the calipersits at 10 o'clock (right side) or two o'clock (left side). Spacers areinstalled first, followed by the brackets.
http://images.mustangmonthly.com/techarticles/173_0311_brake_5b_s.jpg
http://images.mustangmonthly.com/techarticles/173_0311_brake_6_s.jpg
6. Install the parking-brake-cable bracket as shown, angled toward thefront of the vehicle.
http://images.mustangmonthly.com/techarticles/173_0311_brake_7_s.jpg
7. Before installation, clean both brake rotors with solvent to removeany preservative. It is a good idea to use brake-cleaning solventbecause it evaporates quickly.

Prev  | 1  | 2  | 3  | Next
Get Adobe Flash player
FREE, no-hassle price quotes on the new Mustang you’ve been looking for.
 
SVT Owners Association - Back On Track
After Three Years Of Uncertainty, The SVT Owners Association Has Been Reorganized Under The Leadership Of New Director Marcie Cipriani... more
 
SVT Owners Association - Back On Track
After Three Years Of Uncertainty, The SVT Owners Association Has Been Reorganized Under The Leadership Of New Director Marcie Cipriani... more
 
How To Install A High-Performance Starter
MSD's New Ford Starter Is A Top-Quality Upgrade For High-Compression Engines... more
 
June 2008 YO Club Winner
Adam Sanders of Millersville, MD is the June 2008 YO Club Winner... more
 
Mustang's 20th Anniversary Special - Lookback
In 1984, Ford Celebrated The Mustang's 20th Anniversary With A Special Edition... more
 
1970 Boss 429 - Sleeping Giant
Jan Byrd Could Only Dream About Owning This Boss 429 When He Sat In It As A Teenager. But Dreams Do Come True.... more
 
How To Replace A Convertible Top
California Mustang And Hydro-E-Lectric Make Open-Air Driving A Cinch With Everything You Need For Top-Down Performance... more
 
Ford Mustang 100th Anniversary Experience - Pony Tales
Exclusive Ford Mustang 100th Anniversary Experience, featuring the Carlisle All-Ford National event, New Chief Of Mustang, and More!... more
 
1999 Ford Mustang N-95 Fox-4 - Mustang!!! 1999-2003
Exclusive 1999 Ford Mustang N-95 Fox-4, featuring a throaty, 3-inch dual exhaust tailpipe, 3.8L Essex V-6 engine, and More!... more
 
1990 Ford Mustang LX - The Grand National Fast Times At Lowe's
Exclusive 1990 Ford Mustang LX racing The Grand National Fast Times At Lowe's, with 109 Mustangs on the Pony trail, and More!... more

 

Get Adobe Flash player