Mustang Monthly Homepage Mustang Monthly

Mump 0602 Classic Design Concepts S197 Mustang Shaker 07 Z

<B>4</B> At this point you're ready to drill a 1-inch hole in one corner of the intended cutout, then insert a jigsaw or air saw and trace around the perimeter. The cutting is easy, especially on the '05's aluminum hood. Word is the '06 will switch to regular sheetmetal.
Install an '05-'06 Shaker Hoodscoop

4 At this point you're ready to drill a 1-inch hole in one corner of the intended cutout, then insert a jigsaw or air saw and trace around the perimeter. The cutting is easy, especially on the '05's aluminum hood. Word is the '06 will switch to regular sheetmetal.  View Related Article

 

Get Adobe Flash player