Install Cobra Brakes
|
At the rear, the Vintage Venom kit is designed to fit 8- or 9-inch small-bearing axles. After removing the existing brakes, pull the axle to prepare it for the Vintage Venom conversion. You'll need to press-off the axle bearing, then install the Vintage Venom bracket between the axle retainer and the new bearing. To make sure the axle retainer can move closer to the end of the axle, grind down the casting lines on the axle and enlarge the retainer opening before assembling the retainer and bracket. View Related Article
|
|
|
|