How To Install S197 Caster Camber Plates Front View
|
Reinstall the bolts that hold the strut to the spindle and torque them to 148 lb-ft. Reattach the brake-line bracket and the ABS sensor wire as well as the sway-bar endlink to the strut; torque the sway-bar link to 85 lb-ft. Loosen the five nuts on the plate slightly until the plate can barely slide in its adjustment slots. Slide the plate forward and torque the 10mm nut to 26 lb-ft. Then center the strut shaft in the strut-tower opening. Once centered, torque the 8mm nuts to 20 lb-ft. Complete the installation with a front-end alignment. Be sure to pass on to the alignment shop the important information contained in the MM instruction sheet. View Related Article
|
|