Mustang Monthly Homepage
Facebook Subscribe Now | Reader's Rides

Autolite Alternator Brush Block Installed

 
 
Autolite Alternator Brush Block Installed
Autolite Alternator Brush Block Installed
The brush block is installed next with the installation pin in place to hold the brushes. The installation pin sticks through the case. By the way, minimum acceptable brush length is 5/16 inch. View Related Article
Autolite Alternator Alternator Autolite Alternator Remove Pulley Fan And Spacer Autolite Alternator Corrosion Autolite Alternator Stubborn Fasteners Autolite Alternator Alternator Case Halves Autolite Alternator Removing Connector Nuts Autolite Alternator Brush Block Removal
Autolite Alternator Front Case Bearing Removal Autolite Alternator Rotor Autolite Alternator Complete Circuit Autolite Alternator Stator Rectifier Checked Autolite Alternator Slippers Autolite Alternator Parts And Hardware Autolite Alternator New Brushes Installed
Autolite Alternator Restoration Treatment Autolite Alternator Restoration Treatment 2 Autolite Alternator New Bearing Autolite Alternator Stator Rectifier Assembled Autolite Alternator Brush Block Installed Autolite Alternator Stator Rectifier Secured Autolite Alternator Shaft Bearing Pressed Forward Case
Autolite Alternator Rotor Installed Autolite Alternator Install Three Case Screws Autolite Alternator Pull Brush Installation Pin Autolite Alternator Fan Spacer And Pulley Installed Autolite Alternator Alternator Starter And Generator Tested Autolite Alternator Completed Autolite Alternator Completed 2
Get Adobe Flash player
Mustang Monthly